Bitcoin Core Full Node on Mac OS, with Electrum Personal Server, and Electrum Desktop Wallet.
This article explains how to set up Bitcoin Core, Electrum Personal Server (EPS), and Electrum Desktop Wallet, and then privately connect the Wallet to Bitcoin Core via EPS.
Before the “How” to run your own node, if you would like to learn “Why” you should run your own Bitcoin node, read this first. Link
It would be nice if your Electrum Wallet could just get blockchain data from your own Bitcoin Core, but it can’t. It needs an Electrum Server to be the middle man. The server does not copy the Blockchain data, it is not a node — Bitcoin Core is.
Note the Electrum Personal Server (EPS) is one of several server options. Others include Electrum Server in Rust (Electrs), the no-longer-supported ElectrumX, and ElectrumX/Spesmilo which is an ElectrumX variant that is supported. There are others too, each with different trade offs. I will make guides for these later.
One thing to note about EPS is that it really is “personal” — it only connects to one Electrum Wallet at a time. So if your desktop wallet is connected, don’t spend hours tinkering with your mobile Electrum Wallet trying to figure out why it doesn’t connect (true story). You also can’t be the “Uncle Jim” of your social circle with EPS, by providing a trusted node for them to connect to. I suggest getting EPS working first, then I’ll show you how to install the more powerful servers next time, after I figure it out. I’ll go through more hours of pain and suffering, so you all won’t have to.
This is slightly more technical than running a bundled node like MyNode (link) or RaspiBlitz (link) ; these have many other applications you can run with a relatively straightforward install — but because there are more moving parts, when something goes wrong it’s harder to troubleshoot. By all means, use those easy-to-install nodes, but I would do that IN ADDITION to this. When something goes wrong and you end up needing to re-sync the blockchain on your bundled node, at least you have this simple setup up which will not let you down. The MyNode setup (and Ronin Dojo) are inside docker containers — you need to be a computer scientist to have any hope of accessing the files manually.
This article will guide you with some command line. Most important tip from here on is PAY ATTENTION TO DETAIL, a small typo can leave send you down a frustrating search for “why does this not work?” I promise, it will be easy if you follow the instructions, ask me if you get stuck. This does require you to know how to navigate around the file system in Linux/Mac. If you don’t, then watch this 11 minute video to learn some SSS (super simple stuff).It’s about Linux, but it works the same on a Mac.
If it’s mildly interesting, watch this one as well, it’s a bit longer:
The Hard Drive
You can connect and format an external hard drive, or use your internal hard drive. Be prepared to use up about 350 Gb (in 2020), and have spare for it to grow. Connecting a 1 or 2 terabyte solid state drive is preferable but is extra cost.
Download Bitcoin Core
Download the Mac version from http://bitcoin.org/en/download
Verify release signatures to download a file containing the SHA 256 hashes of each Bitcoin Core OS version, for reference.
Next, using terminal, navigate to where Bitcoin Core was downloaded (usually
~/Downloads/ ) and type:
shasum -a 256 NameOfDownloadedFile
This will give you a hash output. Compare the output with the listed hash you downloaded, to make sure the file has not been tampered with.
Extract the downloaded file using the graphical interface. I suggest moving the extracted directory to the desktop, and rename it “Bitcoin”
Run Bitcoin Core graphical user interface by double clicking the icon.
It will ask you where to store the bitcoin directory — custom or default. Select default if you are using the internal drive, and if you are using an external drive, select “custom” and provide the location of you drive.
Before clicking OK, make sure “discard blocks after verification…” is not selected.
It should now start downloading the blockchain and will take several days. HOWEVER, before you get too far, go to the menu “settings” and click “options…” and make sure that “prune block storage” option is not checked — assuming you want your node to be a full un-pruned node. If you changed this now, close the program and run it again. It will delete the blockchain data it has downloaded and will start again.
Meanwhile, we need to edit the bitcoin configuration file.
bitcoin.conf file is through the graphical user interface. Go to menu “settings” and select “options…” and click “open configuration file”.
You’ll see it is blank. Add a line
txindex=1— this allows any transaction to be looked up by Bitcoin Core, not just your own wallet. On the next line, add
server=1. This allows Electrum Personal Server to talk to Bitcoin Core.
Save and exit.
You’ll need to shut down Bitcoin Core and restart it for the config file changes to take effect, but don’t worry, this time you won’t lose any blockchain data that you’ve already downloaded.
My mac did not have GPG installed. Newer ones may. To install gpg, in terminal, type:
brew install gpg
Download Electrum Personal Server
You can do this while Bitcoin blockchain is downloading.
Go to the Github release page. Link
There are two files you need to download. The source code (don’t worry, we aren’t compiling) and the signature.
Download one of the source codes (either the “.zip” compression, or the “.tar.gz” compression). Also download the corresponding “.asc” file. Eg, download “SourceCode.zip)” and “eps-v0.2.1.1.zip.asc”.
Next, download Chris Belcher’s public key; there is a link on the page, and it’s also here: Link
Click “raw” and then save the data to your computer. Note it’s location. Open the terminal, and navigate to the location of the the public key. (If it’s in Downloads, type
cd ~/Downloads and
gpg --import NameOfPublicKey
In Linux/Mac, the double dash precedes options to commands that are longer than one letter. A single dash means that if more than one letter follows, each letter is an individual option. Eg
-abcd is four separate options, and
--abcd is one option that’s called “abcd”.
With the above command, Chris’s public key should be now stored in your computer.
Next, in the terminal, navigate to where the source code and signature file is. Type
gpg --verify NameOfSignatureFile NameOfZipFile
Note the space after
If the signature file and the zip file only differed by an “.asc” at the end of the signature file (eg
abcdefg.zip.asc), then in the gpg command you don’t need to type the “NameOfZipFile”. Gpg will know what you want.
The output should say something like this:
gpg: assuming signed data in ‘eps-v0.2.1.1.zip’gpg: Signature made Tue 9 Jun 23:30:42 2020 AESTgpg: using RSA key EF734EA677F31129gpg: Good signature from “Chris Belcher <firstname.lastname@example.org>” [unknown]gpg: WARNING: This key is not certified with a trusted signature!gpg: There is no indication that the signature belongs to the owner.Primary key fingerprint: 0A8B 038F 5E10 CC27 89BF CFFF EF73 4EA6 77F3 1129
Good signature from is the crucial part. The warning is not relevant; safe to ignore.
Next, unzip the source code and put the directory where you want it. I put it on the Desktop. Then rename it to something easy to type, eg “eps”.
Install Electrum Personal Server
Next is the bit that I seriously tripped up on, and I want it to go smoothly for you:
In terminal, check that you have Python 3 installed. Type
Python3 --version. If you don’t have at least version 3, download it from here.
Run this command to make sure you have the latest version of “pip”:
sudo pip3 install --upgrade pip
Then, navigate in terminal to the unzipped directory which you wisely placed on the Desktop and renamed
~/Desktop/eps/. Inside, there should be several files (and directories) including a file called
Within this directory, type
pip3 install ---user .
Pay attention… there is a “.” after “user”. I have tripped up, trying on various operating systems and computers, and always failed at this point, until I realised I wasn’t typing that pesky “.”
user is typed as is, it’s not your username. Don’t replace bit with “MacLoginUserName”.
Also note, if you accidentally type the command with
sudo at the start it will install EPS as the root which is not what we want. We want to install it to “MacLoginUserName”
I got the following error…
ERROR: Could not install packages due to an EnvironmentError: [Errno 13] Permission denied: ‘/Users/MyMacLoginUserName/Library/Python/3.8/lib’Check the permissions.
Wait, “Errno”? is that a typo in the error message?
It’s fiddly but it can be fixed. If we typed
sudo before the install command, the software gets installed in an administrator directory and is hidden from the user account; we don’t want that. So instead, we can give the user access to the destination directory.
- Open a Finder window and navigate to
/Users/YourUserName. Then press the
.simultaneously to reveal hidden files and directories.
Librarywill appear. Go into
Python. You’ll see a
3.8with a “no entry” sign. We are not allowed in there. Minimise the window and leave it open for reference.
- In terminal, navigate to
/Users/YourUserName/Library, and type
sudo chown YourUserName: Python— don’t forget the
:with a space after it. This changes the owner of the Python folder from the
rootadministrator to the user. (We are going to reverse this after installation for safety)
- In terminal, navigate to
/Users/YourUserName/Library/Python, and type
sudo chmod 750 3.8/(Note the space after
750). This allows anyone with a username and password for the machine to look in this directory. (We are going to reverse this after installation for safety)
- In terminal, navigate to
/User/YourUserName/Desktop/eps/assuming that’s where you put the unzipped directory for eps, and you renamed it
pip3 install --user ..There’s a space after
useras is. Don’t forget the
You should get an output similar to this…
WARNING: The script electrum-personal-server is installed in ‘/Users/YourUserName/Library/Python/3.8/bin’ which is not on PATH.Consider adding this directory to PATH or, if you prefer to suppress this warning, use — no-warn-script-location.NOTE: The current PATH contains path(s) starting with `~`, which may not be expanded by all applications.Successfully installed electrum-personal-server-0.2.0.dev0
IGNORE THE WARNING ABOUT “PATH”
6. Next, in terminal, navigate to
mv electrum-personal-server /Users/YourUserName/Desktop/eps
This will move the executable file out of the folder we are going to make hidden again, and into somewhere convenient.
7. Next, again in terminal, navigate to
sudo chmod 700 3.8/
(this reverses the less secure access)
8. Lastly, navigate to
/Users/YourUserName/Library, and type
sudo chown root: Python — don’t forget the
: with a space after it. This changes the owner of the Python folder back from the
YourUserName to the
root. Reversed back as promised.
Don’t run EPS yet
Before running EPS, you should:
- Wait for Bitcoin Core to fully synchronise
- Have Electrum Wallet setup up
- Have ready a public key (xpub, ypub, or zpub), or multiple public keys (Xpub’s Ypub’s or Zpub’s) for a multisignature wallet.
Set up an Electrum Wallet
To set up an Electrum Wallet, go to https://electrum.org and download the Mac executable. Make sure you verify the download, it’s extremely important. Instructions on how to do this are the same as described above for verifying Electrum Personal Server, except you need a different key, this time ThomasV’s. It is listed on Electrum Website. Double check you are downloading from the right website address.
Gather your public keys
Copy your public keys from your Electrum wallet, or your hardware wallet(s) and keep them handy in a text file on your desktop.
In your Electrum Wallet, go to the menu “wallet” and “information” and you’ll see this…
This is a multisignature wallet with five Zpubs. You can select each one and copy the text that appears below as needed. If you have a single signature wallet, you’ll see just one “keystore”.
Edit EPS config file
Go to the unzipped
eps directory again and rename the file
The config file needs to be edited properly for the program to work.
Open this text file and begin editing as I will explain. Note, anything that starts with a
# is just a comment and will be ignored by EPS. Also note that for some lines, it may appear not to start with a
#, but in fact it might just be wrapped around from the line above that didn’t fit in the narrow window.
This is a screenshot of part of the
Notice (it’s hard to see at first glance) the config file is divided up by headings in square brackets. EPS looks for specific instructions under these headings.
Also notice the line that says
#multisig wallet = 2 followed by three lines of xpubs. This is an example of text wrapping around that is all actually on one line.
[master public keys]
Under this first heading, add your public keys that you’ll find in Electrum Wallet. I couldn’t get EPS running without first doing this.
For a multisig wallet, for example a 3 of 5 wallet, in the EPS config.ini file, add (all in one line, separating each Zpub with a space)
AnyNameForYourWallet = 3 Zpub1 Zpub2 Zpub3 Zpub4 Zpub5
The number after the equals sign indicates the minimum number of private keys to spend from the wallet, and the number of Zpubs you list defines the number of public keys in the wallet.
This is just like the example given in the config file, except, don’t type a
# at the start.
For a single signature wallet, it’s much easier, under the same heading in the
config.ini file, add the line
AnyNameForWallet2 = zPub
— or use an xPub or yPub
This is the next heading in the
config.ini file. Your Bitcoin Core Node will be running on the same computer as your EPS (I do recommend this, because I have not yet succeed in running EPS and Bitcoin Core on different computers while talking to each other), so leave this address as is:
host = 127.0.0.1
port = 8332
The IP address
127.0.0.1 is code for “this computer” and is universal.
If your EPS really needs to connect to a Bitcoin Core on a different computer on the same home network, then you add the bitcoin core computer’s IP address. I believe you also need to add a line in the Bitcoin Core config file,
rpcallow=ip_address_of_EPS_computer. I haven’t tried hard enough to make this work, so I have no tested instructions for you. It might not even be developed for that, and so it may not be possible yet. If you want to try yourself, don’t let me stop you.
The next part is a bit tricky and non-intuitive:
Note the following lines in the
#add the bitcoin datadir to search for the .cookie file created by the
# node, which avoids the need to configure rpc_user/pass
#leave this option empty to have it look in the default location
#if you dont want to use the .cookie method with datadir, uncomment to config u/p here
Basically, you have a choice
- uncomment the
2. uncomment the
The default is using the
datadir= line and commenting out the 2nd option. Do this.
If during your bitcoin installation, you didn’t move the data directory (where the blockchain is stored), you can leave the line
datadir= as is, BUT if you moved it to the external hard drive, you need to enter the path to the drive after
You can find the path name by going to terminal, and typing
cd /Volumes and then
ls — You’ll see the drive name there. Enter that after
in the EPS config file. If there are spaces in the name of the drive, use quotes around the name. eg.
datadir= /Volumes/“Untitled Drive”
Notice this is a directory where .cookie will be found. You shouldn’t actually enter the file as well, just the directory.
Bitcoin Core’s config file starts empty, however, if you have been playing around with Bitcoin Core prior to this, you may have these lines (below) already in there:
If these lines exist in
bitcoin.conf, Bitcoin Core does not create a
.cookie file. Electrum Personal Server will look for that file, and because it doesn’t exist, it will create an error. This pesky trap blocked me from getting this project done for months. I eventually found this solution from an obscure online forum post in the depths of internet history, among many many non-solutions. Comment out these lines with a
# or delete them, and it will create the elusive
An alternative is to comment out the
datadir= line in EPS
config.ini, add include
rpc_password=PasswordOfYourChoice to that file, and only THEN, you can leave
rpcpassword in the
bitcoin.conf file. During my many weeks of failure, this option still created an error though. Theoretically it should work. Many people posted this issue in forums, and the solution was to go with the
datadir= option. Which didn’t work for me because of the missing
Just in case you want to know:
How to find where the DEFAULT data directory for bitcoin core is?
On a Mac, the default location is:
(For Linux, it’s a hidden file. Located here
~/.bitcoin/. To navigate there, you type
cd ~ and then
cd .bitcoin — you must type that
. which indicates the directory is hidden)
You have to enter at least an address or a public key in the appropriate location of the config file for EPS to run.
If you are not ready with your public keys, you can enter one of your (or anyone else’s) random bitcoin address here, just to get EPS working.
A_Name = bc1qGivEmE6poINt15BitcOINplez
Other config.ini headings
There are other headings, but this is basically all you need to do. The rest of the
config.ini file you can read, and probably leave as is, unless you find a good reason to change something.
Run Electrum Personal Server
Once the EPS config file is edited, and once Bitcoin Core is fully synchronised, and also running, we can run Electrum Personal Server. Do remember Bitcoin Core needs to be running.
Go to the eps directory while Bitcoin Core is running, and type
This is just two filenames separated by a space.
If you are not in the directory for a file you type into a command, you have to type its full path in the command. Here we put both files in the one directory, otherwise we would have had to type the path for each file in the command.
Once you run this for the first time, you’ll get a message about re-scanning, and it will exit. This is normal. It says:
If recovering a wallet which already has existing transactions, then run the rescan script. If you’re confident that the wallets are new and empty then there’s no need to rescan, just restart this script
EPS does some magic I don’t understand, but I think of it as having its own address list to look for. It needs to be told how for back in the blockchain to look. For this it needs to scan the blockchain. You only need to scan as far back as your first bitcoin UTXO was received in the wallet you are going to watch, but I would scan the whole blockchain to remain maximally flexible. It takes a bit longer of course. This is how to do it:
Navigate to your EPS directory. Make sure Bitcoin Core is running, and from there, type
./electrum-personal-server --rescan config.ini
It will ask for the earliest wallet creation date. Enter
1 to start from
block height 1, and
y to confirm.
Now wait a while, possibly a day or two.
Once it is done, run EPS again
Connect your Electrum Desktop Wallet
When you run Electrum Desktop Wallet for the first time, and load your real addresses or public keys, be disconnected from the internet so you don’t accidentally leak private information before you have the settings sorted out correctly. It’s difficult to get the settings right without first running Electrum. So here are the steps:
- Stop Bitcoin Core. Stope EPS. Disconnect the internet (double check by failing to load a webpage)
- Run Electrum
Select server manually
4. Make sure
Select server automatically is not ticked, and type in your local host with
port 50002 (it’s always
127.0.0.1:50002), then click
5. Proceed to making or loading up a wallet, or a watching address. Whichever you choose, make sure it is the same as what you entered in Electrum Personal Server’s
6. Go to the menu “Tools” then “Electrum Preferences”, then change the Base unit from
BTC, then shut down Electrum.
7. Navigate with terminal to
~/.electrum , by typing
cd ~ then
cd .electrum (this directory is only created once Electrum is run for the first time)
nano config and make some changes as follows:
auto_connect should be
check_updates should be
false, but change it to
true — this is really important to prevent your server leaking private information.
server should be
9. Connect to the internet. Make sure Bitcoin Core is running. Make sure EPS is running.
10. Load Electrum Wallet. It should be working and showing your balance, verified by your own Node!
Make sure you have only one wallet open at a time.
Make sure any wallet you open is also specified in the
config.ini file of EPS.
Make sure Bitcoin Core is fully synced and running.
Make sure EPS is running.
I hope people find this useful. Please send comments, corrections, or questions to my Twitter DM, @parman_the, or email email@example.com I’d be happy try to help with obstacles as well. If you succeeded or failed, I’m interested to know.